1 LB – 3/32″ Vulcan NastyCast Cast Iron Repair Electrodes
Size:1 LB 3/32″ Diameter Procedure: Clean weld area if possible. Remove
surface skin and all sharp edges. Bevel joint to form a U-groove. A bead hole
must be welded at right angles to each end of all cracks to prevent spreading.
Use low amperage and maintain a short arc. Short stringer beads or narrow
weave beads should be used to prevent excessive heat build-up. When breaking
the arc, always fill the crater and drag rod back over the weld deposit.
Peening while still hot will help reduce stress. When restriking the arc,
start on previously deposited weld metal, not on the base material. Allow part
to cool slowly.
Product Features
- Premium Electrode used for repairing cast iron.
- Deposits have a close color match to cast iron.
- Contains special fluxing agents for welding dirty, oily, nasty, contaminated cast iron.
- Better than other rods at welding contaminated castings.
- Joins problem cast iron to steel; welds cracked machine bases, housings, and builds up worn areas.